Curb-Mounting Skylights

Models 100 & 101

These units have a long record of trouble-free service in all areas and climates. Domes are formed of time-proven acrylic and retained in a welded aluminum frame, ready for mounting on curbs by others. Self-adjusting counter-flashing, a tough flexible plastic strip, assures a weather-tight installation. Skylights may be single or double glazed.

Click here for enlarged detail

Specifications: Dome skylights shall be factory assembled Model 100 (or 101 double dome) as manufactured by Plasteco, Inc. Each unit shall have an inner frame (.072") and an outer frame (.050") of 6063-T5 extruded aluminum. Inner frame shall have a 6 degree sloping condensation gutter with weepage, a dome elevating leg with continuous EPDM gasket, and self-adjusting counter-flashing. Dome shall be formed of (clear, white translucent or bronze) acrylic to support a uniform 40 psf load. (For Model 101, add: Inner dome shall be formed of (clear or white translucent) acrylic.)
Add Alternate: Fall protection as required by OSHA Regulation 1926.501 "Duty to have fall protection" shall be provided by FallGuard Skylight Screens. These shall be shipped separately and installed prior to the installation of the skylight.
Add Alternate: Plasteco Hail Stone Screens meet the Factory Mutual  recommendations for hail screens. The hail screens must resist impact of a 2" diameter hail stone having an impact energy of 22 ft. lbs.
Specifications: Hail stone screen shall consist of a 1" by 1" x .062 galvanized welded wire mesh overlaid on the FallGuard Skylight Screen.

The following are standard sizes.
Custom sizes are available upon request.

back to catalog